Customization: | Available |
---|---|
Application: | Transportation Tools, Glass Wall, Heat Sink, Decorations |
Certification: | ISO9001, ASTM |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
aluminum alloy plate 1050 h24 3003 h14 zz1100 h32 h112 decorative pattern aluminum sheet
Properties of 1050 Aluminum sheet/Coil
1050 aluminum sheet/coil belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum sheet/coil, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet/coil. Different tempers are available, such as O (annealed), H12, H14, H18, etc.
Elements |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
||
Content |
0.25 |
0.40 |
0.05 |
0.05 |
0.05 |
- |
0.07 |
0.05 |
0.15 |
Remain |
||
Alloy |
Specified |
Tensile |
Yield |
Elongation |
||||||||
Thickness(mm) |
(MPa) |
(MPa) |
(%) |
|||||||||
1050-O/ 1050-H111 |
0.2-0.5 |
65-95 |
Min20 |
Min20 |
||||||||
0.5-1.5 |
Min22 |
|||||||||||
1.5-3.0 |
Min26 |
|||||||||||
3.0-6.0 |
Min29 |
|||||||||||
6.0-12.5 |
Min35 |
|||||||||||
12.5-80.0 |
||||||||||||
1050-H112 |
6.0-12.5 |
Min75 |
Min30 |
Min20 |
||||||||
12.5-80.0 |
Min70 |
Min25 |
||||||||||
1050-H12 |
0.2-0.5 |
85-125 |
Min65 |
Min2 |
||||||||
0.5-1.5 |
Min4 |
|||||||||||
1.5-3.0 |
Min5 |
|||||||||||
3.0-6.0 |
Min7 |
|||||||||||
6.0-12.5 |
Min9 |
|||||||||||
12.5-40.0 |
||||||||||||
1050-H14 |
0.2-1.5 |
105-145 |
Min85 |
Min2 |
||||||||
1.5-3.0 |
Min4 |
|||||||||||
3.0-6.0 |
Min5 |
|||||||||||
6.0-12.5 |
Min6 |
|||||||||||
12.5-25 |
||||||||||||
1050-H16 |
0.2-0.5 |
120-160 |
Min100 |
Min1 |
||||||||
0.5-1.5 |
Min2 |
|||||||||||
1.5-4.0 |
Min3 |
|||||||||||
1050-H18 |
0.2-0.5 |
Min135 |
Min120 |
Min1 |
||||||||
0.5-1.5 |
Min140 |
Min2 |
||||||||||
1.5-3.0 |
Min2 |
|||||||||||
1050-H19 |
0.2-0.5 |
Min155 |
Min140 |
Min1 |
||||||||
0.5-1.5 |
Min150 |
Min130 |
||||||||||
1.5-3.0 |
||||||||||||
1050-H22 |
0.2-0.5 |
85-125 |
Min55 |
Min4 |
||||||||
0.5-1.5 |
Min5 |
|||||||||||
1.5-3.0 |
Min6 |
|||||||||||
3.0-6.0 |
Min11 |
|||||||||||
6.0-12.5 |
Min12 |
|||||||||||
1050-H24 |
0.2-0.5 |
105-145 |
Min75 |
Min3 |
||||||||
0.5-1.5 |
Min4 |
|||||||||||
1.5-3.0 |
Min5 |
|||||||||||
3.0-6.0 |
Min8 |
|||||||||||
6.0-12.5 |
||||||||||||
1050-H26 |
0.2-0.5 |
120-160 |
Min90 |
Min2 |
||||||||
0.5-1.5 |
Min3 |
|||||||||||
1.5-4.0 |
Min4 |
|||||||||||
1050-H28 |
0.2-0.5 |
Min140 |
Min110 |
Min2 |
||||||||
0.5-1.5 |
||||||||||||
1.5-3.0 |
Min3 |
Features and Applications of 1050 Aluminum Sheet/Coil
For its content above in the chart, 1050 aluminum sheet/coil has high ductility and high reflective finish. Besides, 1050 aluminum sheet/coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminum sheet/coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum sheet/coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application such as insulation, food industry,decoration,lamp, traffic signs etc.